Rectangular Bonsai Pot

Initializing renderer...

Parameters

Width(mm)

Width of the pot at the top (longer side)

Depth(mm)

Depth of the pot at the top (shorter side)

Height(mm)

Total height of the pot

Wall Thickness(mm)

Thickness of the pot walls

Taper Angle(degrees)

Angle of the walls from vertical (0 = vertical, higher values = more taper)

Rim Height(mm)

Height of the decorative rim at the top

Rim Thickness(mm)

How much the rim protrudes from the wall

Feet Height(mm)

Height of the feet

Feet Inset(mm)

Distance from the edge to the feet

Feet Taper Angle(degrees)

Angle of the feet from vertical (0 = vertical, higher values = more taper)

Number of Drainage Holes

Number of drainage holes along the length

Drainage Hole Diameter(mm)

Diameter of each drainage hole

Number of Tie-down Holes

Number of holes in the bottom for securing the tree (must be even)

Tie-down Hole Diameter(mm)

Diameter of bottom holes used for securing the tree with wire

Note: You can enter values manually in the input fields. Values are not validated or limited on purpose. Have fun!

A parametric 3D model of a rectangular bonsai pot that you can customize and 3D print. Generates ready-to-print STL files. Features adjustable dimensions, wall taper, decorative rim, and feet. Includes properly sized drainage holes. All dimensions can be fine-tuned to match your specific needs.